Indication/alarm lamp
(1) Preheat lamp
It will automatically preheating device. If turn the starter
switch to "Run" position, it will according to cooling water
(coolant) temperature with the preheat lamp goes on.
When the preheat lamp goes off, it indicates that preheating
is completed.
(2) Warning Lamps
This monitor indicates the following failures, if any one of them occurs.
Ф High jacket water temperature (WATER TEMP)
This lamp goes on when the water temperature rises abnormally.
If the lamp goes on during operation, the emergency stop device
immediately operates to shut down the engine automatically.
The engine control unit will sometimes cause a temporal indication of
the light when operating the starter switch, but it is not related to any
of the warming.
(2) Oil pressure failure (OIL PRESS)
OIL PRESS
If this lamp goes on during operation, the emergency stop device
immediately operates to shut down the engine automatically.
WATER TEMP
AIR FILTER
®
filter blockage (AIR FILTER)
When the air element is blockage, this lamp goes on. Indicating that
the element should be cleaned or replaced.
(3) After Glow Lamp
The After Glow Lamp will be indicated and the engine will be heated
automatically when the water temperature remains less than 30°C.
This procedure will be carried unless it reaches more than
30X)
or
glowing maximum for 3 minutes, and then automatically stop glowing
at the same time of stop indicating.
-
18
-
