(3) Circuit breaker
(4) Emergency stop button
This is a main switch to supply power to a load.
When the load is shorted or in the state of overload, it
trips to protect the generator against trouble.
[Note]
Do not use this circuit breaker to turn ON/OFF the load,
to prevent damage to the circuit breaker.
When it trips with overcurrent, the handle of the
breaker stops between ON and OFF positions. This is
what is called the trip condition.
In this case, push the handle down to the OFF position
to reset it, or else, it cannot be set in ON position.
This is a pushbutton to stop the engine urgently on
emergency case. Do not push the button without emergency
case.
-
20
-
