Dentsply Sirona Ankylos Balance Base Abutment C страница 14 Скачать руководство пользователя | Manualshive

Страница: 14 / 100

background image

14

Solutions for larger tooth gaps

Prosthetic concept

Ankylos also provides a large range of options for
restoration in larger edentulous gaps and free-
ends – both, for conventional restorations as well as
for digitally fabricated CAD/CAM prosthetics. The
following is an overview of the options for providing
your patients with a multi-span bridge.

As well as a bridge, in these cases, restoration is also
possible using single crowns following a tooth-by-
tooth concept. For this purpose, make your decision
using the options shown on the previous page for
single-tooth restorations.

Conventionally
fabricated solutions for

Bridges /

anterior region

Conventionally fabricated solutions for

Bridges / posterior region

Esthetic:

Ankylos Balance

Anterior C/ or /X

The design of the
Ankylos Balance
Anterior C/ and /X
abutments is specially
adapted to the ana-
tomical and peri-implant
situation in the anterior
region.
A wide assortment of
indexed and non-
indexed design variants
and the option of grin-
ding the abutments
provide optimal inte-
gration for the bridges
which can be cemented
or laterally screw-
retained.

Directions: see page 20 ff.

Esthetic:

Ankylos Regular

C/ or /X

The particular strength
of the Ankylos Regular
C/ and /X abutments is
in the posterior region.
Thanks to the convex
sulcus design, you can
also optimally fulfill the
esthetic requirements of
your patients in the side
tooth region.
Indexed and non-
indexed customizable
abutments with a
wide range of forms
and sizes facilitate the
efficient fabrication of
the bridges which can
be cemented or laterally
screw-retained.

Directions: see page 30 ff.

Functional:

Ankylos Regular C/ or /X

with 3-in-1 cap

If you require a simple,
economical solution,
Ankylos Regular C/ and
/X abutments with 3-in-1
cap are your first choice.
The abutment selected
at the chairside remains
in the mouth during the
entire treatment proce-
dure; there is no need
to change abutment
components. Taking the
impression on the abut-
ment level, fabricating a
temporary denture at the
chairside and fabricating
the cementable bridge
in the laboratory are all
performed on the multi-
functional cap, which is
simply clicked onto the
abutment in the patient‘s
mouth.

Directions: see page 30 ff.

Functional:

Ankylos Standard C/

Ankylos Standard C/
abutments are another
option for straight-
forward reconstruction
of edentulous gaps by
means of caps that can
be attached to the
integrated abutments.
Due to the narrower
design of the standard
abutments, these are
particularly suitable for
more confined spaces.
Both cementable and
screw-retained bridges
can be fabricated on
Ankylos Standard C/
abutments.

Directions: see page 84 ff.

«
...
12
13
14
15
16
...
»

Содержание Ankylos Balance Base Abutment C





































































































Отзывы:

Нет отзывов

Похожие инструкции для Ankylos Balance Base Abutment C

Бренд: ZOLL Страницы: 344

Бренд: ABB Страницы: 9

Бренд: Landoll Страницы: 6

Бренд: ParaBody Страницы: 9

Бренд: ParaBody Страницы: 3

Бренд: MacDon Страницы: 45

Бренд: H&S Страницы: 30

Бренд: A.MENARINI Страницы: 2

Бренд: MADRIX Страницы: 12

Бренд: Narcotrend Страницы: 47

Бренд: idi Страницы: 20

Бренд: G&G Страницы: 2

Бренд: H&S Страницы: 46

Бренд: Wassermann Страницы: 24

Sonorex Super RK 31

Бренд: BANDELIN Страницы: 21

BTL7-A/E501-M Series

Бренд: Balluff Страницы: 194

Бренд: B.Pro Страницы: 48

Бренд: ABB Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды