manualshive.com logo in svg

Dentsply Sirona Ankylos Balance Base Abutment C, Лабораторное руководство, Страница: 80 / 100

Поделиться
Скачать
Dentsply Sirona Ankylos Balance Base Abutment C Скачать руководство пользователя страница 80

80

Prosthetic components for 

Ankylos Snap Attachment C/

Ankylos Snap Attachments are 
laser marked according to their use 
with the “C/” for “Cone” marking.

Snap attachments allow for 
compensation of divergences up 
to 20°.

Casting the model

Ankylos Implant Analog for Snap 

Attachment

•  Replica of the position of the 

attachment head and the hex of 
the original abutment in the cast

Fabricating the suprastructure

Ankylos Matrix for Snap 

Attachment

•  For attaching the prosthesis 

to the snap attachments 
incorporated in the mouth

•  Manufactured from Permador 

precious metal alloy

Ankylos Implant 
Analog for Snap  
Attachment

Ankylos Snap  
Attachment C/ with 
matrix

Snap Attachment 

Overdentures on Ankylos® 

Snap Attachments C/ 

Ankylos Snap Attachments C/ are used to attach 
overdentures in the edentulous mandible simply and 
economically.  
An existing prosthesis can be directly attached at 
the chairside or an overdenture is fabricated in the 
laboratory.

Ankylos Snap Attachments are available with tapered 
implant connection geometry only.

Mandibular prosthesis on two  
Ankylos Snap Attachments C/ 

Ø

 2.7

4

.0

Содержание Ankylos Balance Base Abutment C





































































































Отзывы:

Нет отзывов