manualshive.com logo in svg

Dentsply Sirona Ankylos Balance Base Abutment C, Лабораторное руководство

Поделиться
Скачать
Dentsply Sirona Ankylos Balance Base Abutment C Скачать руководство пользователя страница 35

35

Regardless of whether you are planning a prosthetic 
restoration on indexed Ankylos Regular /X abutments 
or on the freely positionable Ankylos Regular C/ 
abutments, the impression is taken with identical 
transfer posts PickUp (open tray) or repositioning 
technique with the C/X mark. 

They are fixed in the Ankylos Regular C/X implant 
analog. As an alternative the impression can be 
made with Ankylos C/ transfer posts. In this case 
a suprastructure can only be fabricated with freely 
positionable Ankylos Regular C/ abutments, because 
no index position has been transferred.

Fixing the Ankylos Regular C/X 

implant analog

Mount and screw into position the 
Ankylos C/X implant analog with 
the Ankylos transfer post fixed in 
the impression. The implant analog 
must be correctly fitted to the 
transfer post in the connection 
taper and index.

Mucosa mask

Insulate the impression with 
silicone lubricant prior to casting 
and coat the area around the 
Ankylos C/X implant analog with 
gingiva casting material. Observe 
the manufacturer‘s directions.

Casting the model

Prepare the master cast using 
dental stone class IV. Here, ensure 
adequate height such that the 
implant analog is covered with 
plaster.
Then, loosen the transfer screw 
and remove the impression.

Note: 

The C/ implant analog can 

only be used with Regular C/ 
abutments.

Step-by-step: 

Preparing the cast

Ankylos Regular C/ 

Ankylos Regular /X 

Содержание Ankylos Balance Base Abutment C





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды