Dentsply Sirona Ankylos Balance Base Abutment C страница 69 Скачать руководство пользователя

Страница: 69 / 100

The abutments for the Ankylos SynCone treatment
concept are only available with non-indexed tapered
connection geometry, as free positioning of the
abutments is essential.

All Ankylos SynCone C/ components are laser-marked
with a “C/” as in “C”onus according to their intended
use.

Impressions

Ankylos Balance C/ Transfer Post

• For transferring the implant

position to the master cast using
the PickUp technique (open tray)

• Available in two lengths
• Two-piece with separate screw

Ankylos Balance C/

Repositioning Post

• For transferring the implant

position to the master cast using
the repositioning technique
(closed tray)

• Repositioning post narrow for

cases with limited space available

• One-piece with integrated thread

Model fabrication

Ankylos Balance C/ Implant Analog

• For fixing the prosthetic

components in the master cast

• Surgical steel, DIN 1.4305

Prosthetic restoration

Ankylos SynCone C/ Abutment

• For the restoration of the

edentulous mandible with an
immediate or delayed loaded
prosthesis on four prefabricated
tapered abutments placed
intraforaminally

• For the restoration of the

edentulous maxilla on six
osseointegrated implants

• Abutments with 5° tapered angle,

adaptable to the clinical situation
via three gingival heights (1.5/3.0/
4.5 mm) and five angulations
(0°, 7.5°, 15°, 22.5° and 30°).

• Cover screw for straight 5°

abutments must be ordered
separately

Prosthetic components Ankylos® SynCone® C/

Ankylos SynCone C/
abutment 5°, straight and
angled, cover screw for
straight abutment

Dimensions Ankylos SynCone C/ abutment [mm]

Ankylos Balance C/ transfer post
with screw and Ankylos Balance C/
repositioning post

Diameters, angulations and head heights Gingival heights

0°

7.5°

15°

22.5°

30°

GH 1.5 GH 3.0 GH 4.5

1.5

3.0

4.5

4.0

Ø 4.0

4.0

Ø 4.0

4.0

Ø 4.0

4.0

Ø 4.0

4.0

Ø 4.0

4.0

Ø 4.0

Содержание Ankylos Balance Base Abutment C





































































































Результаты поиска

Содержание Ankylos Balance Base Abutment C

Отзывы:

Похожие инструкции для Ankylos Balance Base Abutment C

Бренды по названию

Популярные бренды

Dentsply Sirona Ankylos Balance Base Abutment C, Лабораторное руководство

Результаты поиска

Содержание Ankylos Balance Base Abutment C

Отзывы:

Похожие инструкции для Ankylos Balance Base Abutment C

Бренды по названию

Популярные бренды