Denso QK30-U, Руководство пользователя

Страница: 59 / 114

48
Bar Composite symbols GS1 Data
Under the conditions "Code ID mark: Type 1" and " output mode: Separating," a separator (GS: 1Dh) and 2D code ID
near component and 2D Composite component. (For details about the code ID mark,
4" and "Linear component length: Variable," a separator (GS: 1Dh) is
inserted between the linear component and 2D Composite component.
ar Omnidirectional(RSS-14),
GS1 DataBar Truncated(RSS-14 Truncated),
mited(RSS Limited),
nded(RSS- Expanded),
Code data read will be transmitted as is.
GTIN Format Conversion is not applied.
mark are inserted between the li
refer to (5) Code ID mark on pages 35 to 41.)
Under the conditions "Code ID mark: Type
(Note)
GS1 DataBar includes:
GS1 DataB
GS1 DataBar Li
GS1 DataBar Expa
GS1 DataBar Stacked(RSS-14 Stacked),
GS1 DataBar Expanded Stacked(RSS Expanded Stacked),
GS1 DataBar Stacked Omnidirectional(RSS-14 Stacked Omnidirectional)
UPC/EAN Composite symbols
Code data read will be transmitted as is.
/EAN-13/EAN-8) format.
GTIN Format Conversion is not applied.
ditions "Code ID mark: Type 1" and "Code ID mark output mode: Separating," a separator (GS: 1Dh)
n the linear component and 2D Composite component.
t and 2D
UPC
The format setting for each code does not apply to the linear component (UPC-A/UPC-E
Under the con
and 2D code ID mark are inserted betwee
Under the conditions "Code ID mark: Type 4," the 2D code ID mark is inserted between the linear componen
Composite component. (For details about the code ID mark, refer to (5) Code ID mark on pages 35 to 41.)
/EAN Composite symbols with add-on
Cod
The
ply to the linear component (UPC-A/UPC-E/EAN-13/EAN-8) format.
GTI
Und
ode: Separating", a separator (GS: 1Dh)
and mposite component.
Under the conditions "Code ID mark: Type 4" and "Code ID mark output mode: Coupling", the 2D code ID mark is
inserted between the linear component and 2D Composite component.
Under the conditions "Code ID mark: Type 4" and "Code ID mark output mode: Separating", the 2D code ID mark is
inserted before add-on portion and between the linear component and 2D Composite component.
(For details about
the code ID mark, refer to (5) Code ID mark on pages 35 to 41.)
GS1-128 Composite symbols
e data read will be transmitted as is.
format setting for each code does not ap
N Format Conversion is not applied.
er the conditions "Code ID mark: Type 1" and "Code ID mark output m
2D code ID mark are inserted between the linear component and 2D Co
Code data read will be transmitted as is.
The format setting for each code does not apply to the linear component (GS1-128) format.
GTIN Format Conversion is not applied.
Under the conditions "Code ID mark: Type 1" and "Code ID mark output mode: Separating," a separator (GS: 1Dh)
and 2D code ID mark are inserted between the linear component and 2D Composite component.
Under the conditions "Code ID mark: Type 4" and "Linear component length: Variable," a separator (GS: 1Dh) is
inserted between the linear component and 2D Composite component.(For details about the code ID mark, refer to (5)
Code ID mark on pages 35 to 41.)