Denso QK30-U, Руководство пользователя

Страница: 54 / 114

43
) Number of digits
This optional field specifies whether or not to transmit the number of digits (2 or 4 bytes) of code data to transmit or
disables the transm
ult). Note and EAN codes except GS1-128 skip this field.
n1 : thousands (0 to 9)
n2 :
dreds (0 to 9)
n3 : 0
n4 : (0
Selecting the two-digit length does not trans t n1 o
(7) Code data
The data format fo ology is desc d be
QR Code/MicroQR Code/iQR Code
(6
ission (defa that UPC
hun
tens (
nits
to 9)
to 9) u
mi r n2.
r each symb ribe low.
Code data read wi ted as is.
Structure Append QR Code/ Structure Append iQR Code
ll be transmit
In batch edit mod ture Append QR Code on then transmits it.It does
not transmit the code number, number of sp or p
In non-edit mode: The scanner transmits the code num
number and the number of splits are 1 byte each and
at.
SQRC
e(Struc ly): The scanner edits code data read and
arity. lits,
ber, the number of splits, parity, and code data read. The code
the parity, 2 bytes in hexadecimal form
Code data read will be transmitted as is.
When “Enable transmission of undisclosed ta on
ey match”, it transmits only
undisclosed data.
X
1
X
2
X
3
X
4
X
5
Y
1
Y
5
X
n
：
Disclosed da
Y
m
：
Undisclosed data
When Transmission of disclosed data + undisclosed pplies.
X
1
X
2
X
3
X
4
X
5
Y
1
Y Y Y
4
Y
5
When Transmission of undisclosed data only is selected,
Y
1
Y
2
Y
3
Y
4
Y
5
PDF417, MicroPD
Data M ix an
da ly” is selected in “SQRC Encryption k
Y
2
Y
3
Y
4
ta
data is selected, the following format a
2 3
the following format applies.
F417, MaxiCode, atr d Aztec
Code data read will be transmitted as is.