Denso QK30-U, Руководство пользователя

Страница: 109 / 114

98
[2] "I" command parameters
Items Parameter Example Function
T0 IT0 60 ms
Speaker beeping time
T1 IT1 420 ms
V0 IV0 Low
V1 IV1 Medium
Speaker o v lume
V2 IV2 High
F0 IF0 Low tone
F1 IF1 High tone
Speaker tone
F2 IF2 Medium tone
D0 ID0 Light the blue LED for approx. 500 ms.
D1 ID1 Flash the blue LED for approx. 2 seconds at
intervals of approx. 50-ms ON and approx. 50-ms
OFF.
D2 ID2 Light the green LED for approx. 500 ms.
D3 ID3 Flash the green LED for approx. 2 seconds at
intervals of approx. 50-ms ON and approx. 50-ms
OFF.
D4 ID4 Light the red LED for approx. 500 ms.
ON/OFF interval of indicator LEDs
D5 ID5 Flash the red LED for approx. 2 seconds at
intervals of approx. 50-ms ON and approx. 50-ms
OFF.
Note 1: If the scanner receives an "I" command when it is ready to scan, it may take a maximum of 100 ms for the scanner to
operate.
Note 2: The speaker and the indicator LEDs operate regardless of whether they are enabled or disabled.
Note 3: When the same parameters having different values are specified, the last specified one takes effect.
Note 4: Specifications of the speaker volume and tone only do not produce any operation.
Note 5: To specify two or more parameters in a command sequence, separate them with commas (,) as shown below. If any
one of them is wrong, the scanner returns an "NG" response to the host and makes all parameters invalid
(Example) Specification of IT0, ID0
The scanner beeps the speaker for 60 ms and lights the blue LED for approx. 500 ms.