Denso QK30-U, Руководство пользователя

Страница: 111 / 114

100
[6] "DLV" command parameters
ms P Ex le Ite arameter amp Function
Bar code scanning level
ng level 1 to 8
Scanning level

8 (High)
B n DLVB1
to
DLVB8
Scanni
(Low) 1

Default: 2
Note 1: The "DLV" command applies to all on mensiona not nsional ones.
No ing a high scanning level may inc ease the sc e
The entry range of the scanning level is f 1 to 8. ing level value decreases the bar-code
reading efficiency, but it diminishes the possibility of m ng o bar codes (split, stained, thicker, or
. ay misread
] "IS
Function
e-di l codes, to two-dime
te 2: Specify r anning tim required.
rom Increas
isreadi
the scanning
f low-quality
thinner) To the contrary, decreasing the value increases the bar-code reading efficiency, but the scanner m
low-quality bar codes.
[7 " command parameters
Items Parameter Example
Playback of audio data file
n , m
where
n
m
IS1,0
to
IS1,9
Play back an audio data file specified by index, with
the specified playback volume.
Audio file index ( n ):
Playback volume ( m
ume

9 (Maximum)
If it is omitted, the
playback volume specified by the configuration
software (ScannerSetting_2D) or a VOLSND
command applies.
Example: File index 1, Playback volume 0
IS1,0
: 1 to 5
: 0 to9
1 to 5
): 0 to 9
(Minimum) 0

Playback vol
This parameter can be omitted.
[8] "VOLSND" command parameters
Items Parameter Example Function
Playback volume
n , m
where
n : 1 to 5
m : 0 to9
VOLSND 1,0
to
VOLSND 1,9
Specify the playback volume for an audio data file
specified by index.
Audio file index ( n ): 1 to 5
Playback volume ( m ): 0 to 9
(Minimum) 0

Playback volume

9 (Maximum)
Example: File index 1, Playback volume 1
VOLSND1,1