Denon DBP-2012UDCI, Руководство по обслуживанию

Страница: 22 / 92

22
SERVICE MODE
1. Initial setting mode
1.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
1.2. procedure
b Initialize the BD player when com, peripheral parts of com, or MAIN P.W.B. unit has been replaced in servicing.
b All user setting will be lost and its factory setting will be restored when this initialization is made. Be sure to memorize
your setting for restoring again after the initialization.
(1) Turn on this model's power. "NO DISC" is displayed on the FL tube.
(2) Press the this model's
2 and DISC LAYER buttons simultaneously. "INITIALIZING" is displayed on the FL tube.
(3) The display on the FL tube switches to "INITIALIZED", the "NO DISC" display reappears and initialization is
completed.
2. Firmware version check mode
2.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
2.2. procedure
b Front-end and Back-end and SYS com version check mode.
(1) Press the SETUP button on the remote controller to display the SETUP menu.
(2) Press remote controller "3265".
(3) The version is displayed on the TV screen as follows.
4FMFDU
$POGJSN
&/5&3
&YJU
4&561
'NUCVEB
'NUCVEB
3FTFU
'BDUPSZ1BHF
)2)'.$6
+7.$%$"@+7.@
7FSTJPO
-PBEFS$7
%7%3FHJPO$PE
#%3FHJPO$PEF
3FTFU1BTTXPSE
(FOFSBM4FUUJOH
-BOHVBHF
4ZTUFN
3BUJOHT
/FUXPSL
0UIFST
Version HQ 0000xxxx
Back-end version
Version MCUxxx
SYS com version
Loader 㧦 CV00xx
Front-end version