16
[Connection]
(1) Connect the PC and bar code reader.
(2) Connect the 232C (TTL) side 4P PH connector of the USB - 232C (TTL) conversion jig to the MAIN PWB UNIT
(CN601) of the set.
(3) Connect the USB side of the USB - 232C (TTL) conversion jig to the PC.
[Writing new light pick-up data ]
• Barcode position of light pick-up unit
(1) Switch on the power on of the set before the BD MECHA UNIT ASSY is replaced.
(2) Decompress the D&M ScanBarcode Rpower 2.16.60(KES460) _ MP function.zip folder and start the "Rpower.exe".
(3) A pop-up is displayed. Click "OK".
(4) Click "OK".
to PC (USB)
MAIN PWB UNIT
CN601
4P RE-PH CONN CORD (1000mm)
Jumper pin : 3.3V
f
mark
USB - 232C(TTL) conversion jig
View from the bottom
2-Dimensional Bar Code
BD MECHA UNIT ASSY for replacement
(The 2-dimensional bar code can be photographed
with a digital camera, and the barcode data can be
converted with a 2-dimensional barcode reader.)
Содержание DBP-2012UDCI
