69
ENGLISH
Basic version
Simple version
Information
Advanced version
Audio Adjust
n
Surround Parameter
Default settings are underlined.
Adjust surround sound parameters. It may not be possible to set this item depending on the input
signal.
Setting items
Setting details
Mode
Set the play modes for the
different surround modes.
n
In the PL
g
x or PL
g
mode
Cinema
: Surround sound mode optimized for movie sources.
Music
: Surround sound mode optimized for music sources.
Game
: Surround sound mode optimized for games.
Pro Logic
: Dolby Pro Logic playback mode (PL
g
mode only).
n
In the PL
g
z mode
Height
: Dolby PL
g
z Height playback mode.
n
In the DTS NEO:6 mode
Cinema
: Surround sound mode optimized for movie sources.
Music
: Surround sound mode optimized for music sources.
• When “Surround Parameter” – “F.Height” (
v
page 69) is set to “ON”,
the “Height” mode is set automatically.
• The “Music” mode is also effective for movie sources including a lot of
stereo music.
Cinema EQ
Soften the treble range
of movie soundtracks for
better understanding.
ON
: “Cinema EQ” is used.
OFF
: “Cinema EQ” is not used.
DRC
Compress dynamic range
(difference between loud
and soft sounds).
Auto
: Automatic dynamic range compression on/off control according to
source. This can be set in the Dolby TrueHD mode.
Low
/
Mid
/
High
: These set the compression level.
OFF
: Dynamic range compression always off.
D.Comp
Compress dynamic range
(difference between loud
and soft sounds).
Low
/
Mid
/
High
: These set the compression level.
OFF
: Turn dynamic range compression off.
LFE
Adjust the low-frequency
effects level (LFE).
–10dB – 0dB
For proper playback of the different sources, we recommend setting
to the values below.
• Dolby Digital sources : “0dB”
• DTS movie sources : “0dB”
• DTS music sources : “–10dB”
C.Image
Assign center channel
signal to front left and right
channels for wider sound.
0.0 – 1.0 (0.3)
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting
Return to previous menu
Setting items
Setting details
Panorama
Assign front L/R signal also
to surround channels for
wider sound.
ON
: Set.
OFF
: Do not set.
Dimension
Shift sound image center
to front or rear to adjust
playback balance.
0 – 6 (3)
C.Width
Assign center channel
signal to front left and right
channels for wider sound.
0 – 7 (3)
Delay Time
Adjust delay time to control
sound stage size.
0ms – 300ms (30ms)
Effect Lev.
Adjust effect signal level.
1 – 15 (10)
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
Room Size
Determine size of acoustic
environment.
Small
: Simulate acoustics of a small room.
Medium-S
: Simulate acoustics of a medium-small room.
Medium
: Simulate acoustics of a medium room.
Medium-L
: Simulate acoustics of a medium-large room.
Large
: Simulate acoustics of a large room.
NOTE
“Room Size” does not indicate the size of the room in which sources are
played.
F.Height
Determine whether to use
front height channel.
ON
: Audio is output from the front height speaker.
OFF
: Audio is not output from the front height speaker.
NOTE
• “F.Height” is displayed with the settings listed below.
• When “Amp Assign” (
v
page 75) is set to “Normal”.
• When the “Speaker Config.” – “F.Height” setting (
v
page 75) is set to
other than “None”.
• “F.Height” cannot be set if the HD Audio source being played includes a
front height channel. In this case, the Front height channel is played back
without decoding in PL
g
z mode, using the input signal.
Audio/Video Adjust
