Den-Sin Merlion Plus E500, Руководство пользователя и каталог запасных частей

Страница: 19 / 51

2. Safety and protection information
MERLION PLUS - E500 STD04 Page 18 of 50
2.5 Operations
1) Treat the machine as a high-speed cutting tool.
2)
Anyone under the age of 18 is NOT allowed to use the machine.
3)
Always use a proper plug and socket specially designed with ground to earth wiring. Only connect
to an installation with earth wiring. A certified electrician shall make the installation. It is strongly
recommended that the electric supply to the machine include a Residual Current Device/GFCI.
4)
Always keep the Water Blaster and its accessories in good working condition. Check the machine
for defects, especially the insulation on the electric cable. Do NOT start up the machine if there is
any defect. Have the machine serviced.
5)
When using the Water Blaster and its accessories, eye protection must be worn to protect against
repelling or ricocheting matters causing eye damage.
6) Suitable clothing and footwear must be worn while using the equipment to protect the operator. Do
not try to clean clothes or footwear with the machine.
7)
Precautions must be made to keep bystanders away from the working range.
8) Do NOT spray-clean on yourself, others or live animals. The high-
pressure beams are capable of making severe injuries.
9)
Do NOT spray at electrical equipment OR the machine itself.
10)
While repairing or servicing the equipment and its accessories always make sure the machine is
turned off and disconnected from the main power supply.
11)
Only allow instructed personnel to operate the machine.
12)
Activating the trigger/gun can cause backward force therefore always hold spray lance with both
hands.
13)
When pausing during operation, stop the machine by turning the main switch to position
‘0’
and
ensures that the trigger/gun is locked.
14)
Only use high-pressure hoses, connections and nozzles specified by
DEN-SIN
.
15) IMPORTANT
– Do not use the machine in a possible explosive environment in accordance with
EN-50014.
2.6 Application Guidelines
1)
It is not allowed to clean asbestos containing surfaces with high-pressure, unless using special
equipment.
2) Persons under the influence of alcohol, drugs or medicine should not operate the machine.
3)
Do not touch the electrical plug and socket with wet hands.
4)
Always unplug power supply when cleaning and maintaining the machine.
5) Do not use the machine if important parts are damaged – i.e. safety devices, high-pressure hoses,
spray handle.
6)
The user is obliged to observe all national working environment and working safety regulations
concerning “operation of high-pressure washers”.
7)
It is not allowed to connect this machine directly to a potable water supply.
8)
If the machine is to be connected to potable water supply it is strictly necessary to fit the machine
with a water break tank, in accordance with EN1717.
WARNING
To prevent accidents from happening, ensure the safety of the person(s) who
uses the equipment and to protect bystanders and nearby placed inventory or
machinery, a few safety precautions needs attention