Den-Sin Merlion Plus E500 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 51

Den-Sin Merlion Plus E500 Скачать руководство пользователя страница 21

3. Maintenance and troubleshooting

MERLION PLUS - E500

STD04

Page 20 of 50

Machine Do`s and Don`ts

Do’

Don’t

Action

Cause

Spray directly onto the machine with high
pressure water

Electrical shock may occurs

Operate the machine with damaged or removed
fan cover

Motor will be overheated and malfunction

Operate/keep machine with frost built up

Flush pump with antifreeze fluids before use.

Check hose and cord are not vehicle run over
by heavy or squeezed in door opening

May cause machine not function properly.

Check electrical cord and high pressure hose
for wear and cracks

To prevent electrical shock and safety to the user

Ensure coupling parts free of dirt to ensure
long life of O-ring seals preventing water leaks.

Extend life span of the pump seals and maintaining correct

pressure.

Release any residual pressure from the gun
when the machine is shut down

To prevent injuries others if the trigger is accidentally

pressed.

Used oil must be properly disposed. Do not dispose used oil into the environment that
will cause pollution to the environment.

WARNING

«
...
19
20
21
22
23
...
»

Содержание Merlion Plus E500




















































Отзывы:

Нет отзывов