Den-Sin Merlion Plus E500 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 51

background image

Getting Acquainted with your Heavy Duty Pressure Washer

MERLION PLUS - E500

STD04

Page 9 of 50

1.6 HIGH PRESSURE MACHINE LOCKOUT/TAGOUT PROCEDURE

This procedure establishes lockout on the high pressure machine that could cause injury to personnel. All
operators shall comply with the procedure. Equipment shall be locked out to protect against accidental or
inadvertent operation when such operation could cause injury to personnel. Do not attempt to operate any
switch, valve, or other main switch bearing a lock.

Responsibility

The responsibility for seeing that this procedure is followed is binding upon all operators. All operators
shall be instructed in the safety significance of the lockout procedure by (designated individual). Each new
or transferred affected operator shall be instructed by (designated individuals) in the purpose and use of the
lockout procedure.

Sequence of Lockout Procedure

1.

Notify all affected operators that a lockout is required and the reason therefor.

2.

If high pressure machine is operating, shut it down by the pressing the stop button. Only turn off the
booster pump switch when the motor has come to a stop.

3.

Turn the main isolator to the off position.

4.

Release residue pressure in the trigger gun.

5.

Lockout the main isolator with a lock assigned individual lock. This is to disable the operation of

the machine.

6.

Lock the electrical box and the keys are kept with an assigned individual lock to prevent any

unauthorized modification to the machine control settings.

7.

Lockout the trigger with a lock that is assigned individual lock. This is to prevent accidentally activate

the trigger or sabotage. Possible way to lock the trigger gun as shown below.

After ensuring that no personnel are exposed and as a check on having disconnected the power sources,
operate the start push button and main switch to ensure the high pressure machine will not operate.

 

CAUTION: Return operating controls to neutral position after the test.

8.

The equipment is now locked out

Restoring Equipment to Service

1.

When the high pressure machine is to operate at is normal service, check the area around the machine

that no one is exposed. Barricade the area of working zone to prevent people entering the working zone.

2.

When equipment is clear, remove all locks. Turn on the main switch, unlock the trigger gun lock and start

the normal operating procedure to start using the high pressure machine.

Lock

«
...
8
9
10
11
12
...
»

Содержание Merlion Plus E500




















































Отзывы:

Нет отзывов

Похожие инструкции для Merlion Plus E500

Бренд: V-ZUG Страницы: 8

Бренд: T-Fal Страницы: 56

Pressure Cooker

Бренд: T-Fal Страницы: 30

Бренд: SIP Страницы: 16

Бренд: Briggs & Stratton Страницы: 132

Бренд: Reaim Страницы: 12

Бренд: T-Fal Страницы: 30

HDS 645-4 M Basic

Бренд: Kärcher Страницы: 328

Бренд: Asko Страницы: 59

Бренд: eta Страницы: 92

Бренд: Kärcher Страницы: 48

Бренд: HEC Страницы: 14

Бренд: Kärcher Страницы: 172

Бренд: san ignacio Страницы: 74

Pico Power 7920

Бренд: Hozelock Страницы: 12

WF45N6300A Series

Бренд: Samsung Страницы: 58

Бренд: Samsung Страницы: 68

Бренд: Samsung Страницы: 124

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды