Den-Sin Merlion Plus E500 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 51

background image

Getting Acquainted with your Heavy Duty Pressure Washer

MERLION PLUS - E500

STD04

Page 11 of 50

Machine Installation / setup

Make  sure  that  the  machine  is  operating  on  flat  floor  or
inclined not more than 10Deg.
The machine must be parked or securely tighten to structure.

Mount  the  supplied

½” high-pressure hose

onto the Water

Blaster  onto  ½”  high-pressure  fitting  on  the  HP  Water  Outlet
as labelled.

Prepare  the  water  supply  by  attaching  water  hose  to  the
supplied  Low  pressure  Inlet  (Crawl  Coupling),  as  labelled

.

Turn on the water supply tap and fill the water tank with water.
When water tank is full, the water will be cut off to prevent
overflow.

Connect the main power cord to a grounded 3-phase main power supply. Turn on the power and
the  Water  Blaster.  Ensure  the  motor  and  pump  turns  anti-clockwise  (view  from  motor  fan  end)
indicated by the arrows on the coupling cover.

When  machine  is  power  up,  water  will  to  start  flowing  out  from  the  machine.  This  is  to  ensure
pump is free from air pockets which would result in cavitation.

Next, power off machine and mount the Trigger Gun with Lance to the other end of the ½” high-
pressure hose. Always use two wrenches when tightening the hoses.

Switch  on  the  motor  and  allow  it  a  few  seconds  for  the  star  delta  connection  to  switch  over
automatically. The Water Blaster is now ready for operation. Get a firm grip with both hands on
the spray-gun handle and the lance. Press the trigger and start blasting.

After shut down of the Water Blaster, always release the pressure inside the high-pressure hoses by
pulling the trigger on the spray-gun before dismantling the high-pressure hoses.

CAUTION

It is NOT allowed to connect this Heavy Duty Pressure washer directly to a
portable water supply! If portable water is used, it is strictly necessary to
include a water break tank in accordance to EU standards EN 1717

Make  sure  your  local  power  supply  specifications  are  in accordance  with  the
motors  specification  Refer  to  the  ID-plate  located  at  the  electrical  box  or
frame.  Do  not  let  the  machine  recycle  the  water  (running  with  Spray-gun
trigger not activated) for more than 10 minutes; this can cause serious damage
to the seals

«
...
10
11
12
13
14
...
»

Содержание Merlion Plus E500




















































Отзывы:

Нет отзывов

Похожие инструкции для Merlion Plus E500

Бренд: Fagor Страницы: 68

Бренд: Zavor Страницы: 2

HDS 2.0/10 Ed Cage

Бренд: Karcher Shark Страницы: 28

Бренд: Parkside Страницы: 34

Бренд: Parkside Страницы: 48

Бренд: Parkside Страницы: 32

Бренд: Parkside Страницы: 70

Бренд: Wap Страницы: 20

Бренд: Speed Queen Страницы: 12

sunjoe SPX2598-ELT

Бренд: SNOWJOE Страницы: 20

Poseidon 5 Series

Бренд: Nilfisk-ALTO Страницы: 68

Бренд: THOMSON Страницы: 36

Бренд: John Lewis Страницы: 32

Бренд: Sealey Страницы: 5

SUNJOE SPX3000-XT-RM

Бренд: SNOWJOE Страницы: 20

Бренд: Kärcher Страницы: 18

Бренд: Lavor Страницы: 56

PROFESSIONAL WMC84P

Бренд: Asko Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды