DEMA E-Royal Modest 2021, Руководство по эксплуатации и обслуживанию

Страница: 59 / 60

12 DISPLAY MANUAL DP C10.UART
• Wheel Diameter check
Speed position displays
Wd, The measurements
are in inches. A wrong
wheel diameter can lead
to speed anomalies.
After this setting, briefly
press (< 0.3 seconds) to
enter the setting interface of speed limit.
• Speed Limit Setting
When the speed field
displays SPL, the distance
field displays the value of
the speed limit. Minimum
speed limit is 12km/h,
maximum speed limit is
60km/h.
After setting, Briefly Press (< 0.3
seconds) to enter the menu of battery com-
munication.
• Battery Communication
The speed field displays
b01 and the distance field
displays the speed limit.
Press
(< 0.3 seconds)
to cycle backward. After
this setting, press
(<
0.3 seconds) to enter into
the interface of memory for error code.
1) Only when communication has been
established between the battery and the
controller the following information will be
displayed, otherwise the display will only
show "- - - -".
2) Information on the battery menu:
The speed
field displays
Definition Unit
b01
Current
temperature
℃
b04 Total voltage V
b06 Average current A
b07
Remaining
capacity
Ah
b08 Full capacity Ah
b09
Relative state of
charge
b10
Absolute state
of charge
b11
Charge/
discharge cycle
b12
Longest period
without charge
h
b13
Period since last
charge
h
d00 Cell quantity
d01
Voltage of
cell 1
V
d02
Voltage of
cell 2
V
……… ………
dn
Voltage of
cell n
V
12 DISPLAY MANUAL DP C10.UART
• Wheel Diameter check
Speed position displays
Wd, The measurements
are in inches. A wrong
wheel diameter can lead
to speed anomalies.
After this setting, briefly
press (< 0.3 seconds) to
enter the setting interface of speed limit.
• Speed Limit Setting
When the speed field
displays SPL, the distance
field displays the value of
the speed limit. Minimum
speed limit is 12km/h,
maximum speed limit is
60km/h.
After setting, Briefly Press (< 0.3
seconds) to enter the menu of battery com-
munication.
• Battery Communication
The speed field displays
b01 and the distance field
displays the speed limit.
Press
(< 0.3 seconds)
to cycle backward. After
this setting, press
(<
0.3 seconds) to enter into
the interface of memory for error code.
1) Only when communication has been
established between the battery and the
controller the following information will be
displayed, otherwise the display will only
show "- - - -".
2) Information on the battery menu:
The speed
field displays
Definition Unit
b01
Current
temperature
℃
b04 Total voltage V
b06 Average current A
b07
Remaining
capacity
Ah
b08 Full capacity Ah
b09
Relative state of
charge
b10
Absolute state
of charge
b11
Charge/
discharge cycle
b12
Longest period
without charge
h
b13
Period since last
charge
h
d00 Cell quantity
d01
Voltage of
cell 1
V
d02
Voltage of
cell 2
V
……… ………
dn
Voltage of
cell n
V
12 DISPLAY MANUAL DP C10.UART
• Wheel Diameter check
Speed position displays
Wd, The measurements
are in inches. A wrong
wheel diameter can lead
to speed anomalies.
After this setting, briefly
press (< 0.3 seconds) to
enter the setting interface of speed limit.
• Speed Limit Setting
When the speed field
displays SPL, the distance
field displays the value of
the speed limit. Minimum
speed limit is 12km/h,
maximum speed limit is
60km/h.
After setting, Briefly Press (< 0.3
seconds) to enter the menu of battery com-
munication.
• Battery Communication
The speed field displays
b01 and the distance field
displays the speed limit.
Press
(< 0.3 seconds)
to cycle backward. After
this setting, press
(<
0.3 seconds) to enter into
the interface of memory for error code.
1) Only when communication has been
established between the battery and the
controller the following information will be
displayed, otherwise the display will only
show "- - - -".
2) Information on the battery menu:
The speed
field displays
Definition Unit
b01
Current
temperature
℃
b04 Total voltage V
b06 Average current A
b07
Remaining
capacity
Ah
b08 Full capacity Ah
b09
Relative state of
charge
b10
Absolute state
of charge
b11
Charge/
discharge cycle
b12
Longest period
without charge
h
b13
Period since last
charge
h
d00 Cell quantity
d01
Voltage of
cell 1
V
d02
Voltage of
cell 2
V
……… ………
dn
Voltage of
cell n
V
4.3. Opis napak
Na prikazovalniku DP C10 lahko prikažete napake e-kolesa. Ko je odkrita napaka, bo ikona
premaknjena. V polju za hitrost se prikaže ena od naslednjih kod napak.
Koda napake Opis napake Reševanje napak
04 Plin se ni vrnil domov Preverite ali se je plin vrnil domov
05 Okvara plina Preverite motor
07 Prenapetostna zaščita Preverite napetost
08 Napaka signalnega kabla v hali motorja Preverite motorno enoto
09 Kabel napake faze motorja Preverite motorno enoto
11 Sensor za temperature ne deluje Preverite senzor
12 Trenutna okvara senzorja Preverite senzor
13 Pregretje baterije Preverite baterijo
14 Pregretje motorja Preverite motor
21 Okvarjen sensor za hitrost Preverite položaj in postavitev senzorja
22 BMS povezava okvarjena Zamenjajte baterijo
30 Povezava prekinjena Preverite povezave senzorjev in kablov
5. Odstranjevanje elektronske opreme
Spoštovani potrošnik, nekega dne bo izdelek odslužil in potrebno ga bo odstraniti na eko -
loški način, ki ne škoduje okolju. Materiale, ki jih je mogoče reciklirati, ločimo in ponovno
uporabimo za industrijske namene. Preprečuje se tudi uhajanje kakršnih koli škodljivih snovi
v naravo. Končno odlaganje in recikliranje plača proizvajalec naprave, opravi pa ga določena
organizacija. Edina pomembna dolžnost potrošnika je prevoz proizvoda na eno od teh lokacij:
trgovina, kjer kupi nov izdelek (izdelek za izdelek) v drugih točkah za prevzem, ki jih natančneje
določi občina ali proizvajalec. Električne komponente E-kolesa, vključno z ožičenjem, je treba
reciklirati ločeno, da se zaščiti okolje. Pokvarjene ali prazne baterije je treba zbrati in ustrezno
odstraniti z drugimi ločenimi gospodinjskimi odpadki.
Proizvod se v nobenem primeru ne sme odlagati skupaj z gospodinjskimi
odpadki (smeti) ali v naravo!
Delovanje in navodila za vzdrževanje koles SI 59