4.1. Normal operation
ON/OFF Switch
Turn on the device, press and hold for 2s to power on the display. Press and hold again for
2s to power off the display, If the bike is not used, after 5 minutes (time can be set) the display
will be automatically turned off.
Assist Mode Selection
In the manual gearshift mode, press the
+
or
-
choose the desired level of support by the motor.
The lowest level is Level 1, the highest Level 5.
When the display is on, the default mode is Level
1. When there is no numeric mode display, there is
no power assistance.
Headlight/ Display Backlight Switch
Press
8
DISPLAY MANUAL
DP C10.UART
•
Switch between Distance Mode and
Speed Mode
Briefly press
to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
•
Headlight/ Display Backlight Switch
Press
for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
•
Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
. for 2 seconds. The backlight of the display
as well as the headlight and taillight will be turned
on. Press
8
DISPLAY MANUAL
DP C10.UART
•
Switch between Distance Mode and
Speed Mode
Briefly press
to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
•
Headlight/ Display Backlight Switch
Press
for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
•
Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
again for 2 seconds to power off the
display backlight / headlight / taillight. There are 5
levels of backlight brightness that can be selected
by the user. (If the display is turned on in a dark
environment, the display backlight / headlight /
taillight will be turned on automatically. If the dis
-
play backlight / headlight / taillight are turned off
manually, they also need to be turned on manually
afterwards).
Walk Assistance
Press
-
for 2 seconds. The e-bike enters the walk
assistance mode, and the symbol
WALK
is dis
-
played. Once the key
-
is released, the e-bike will
exit the walk assistance mode.
Switch between Distance Mode and Speed Mode
Briefly press to switch between distance
and speed. Single-trip distance (
TRIP km
),
total distance (
TOTAL km
), maximum speed
(
MAXS km/h
), average riding speed (
AVG km/h
),
remaining distance (
RANGE
) and energy consump
-
tion (
C
) are displayed in successive order.
Battery Status Indication
When the battery status is normal, a certain num
-
ber of the battery LCD segments as well as the
border light up according to the actual quantity
of charge. If all of the 10 segments will black out
with the border blinking, the battery needs to be
charged immediately.
7
DISPLAY MANUAL
DP C10.UART
BUTTON DEFINITION
NORMAL OPERATION
•
ON/OFF Switch
Turn on the device, press and hold
for
2s to power on the display. Press and hold
again for 2s to power off the display, If
the bike is not used, after 5 minutes (time
can be set) the display will be automatically
turned off.
•
Assist Mode Selection
In the manual gearshift mode, press the
or choose the desired level of support by
the motor. The lowest level is Level 1, the
highest Level 5. When the display is on, the
default mode is Level 1. When there is no
numeric mode display, there is no power
assistance.
(power assistance lever selection interface as
below figure)
BUTTON DEFINITION
Headlight button
Switch button
Mode button
Up button
Down button
8
DISPLAY MANUAL
DP C10.UART
•
Switch between Distance Mode and
Speed Mode
Briefly press
to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
•
Headlight/ Display Backlight Switch
Press
for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
•
Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
8
DISPLAY MANUAL
DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press
to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press
for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
8
DISPLAY MANUAL
DP C10.UART
•
Switch between Distance Mode and
Speed Mode
Briefly press
to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
•
Headlight/ Display Backlight Switch
Press
for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
•
Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
9
DISPLAY MANUAL
DP C10.UART
NORMAL OPERATION
•
Battery Status Indication
When the battery status is normal, a certain number of the battery LCD segments as well as the bor-
der light up according to the actual quantity of charge. If all of the 10 segments will black out with
the border blinking, the battery needs to be charged immediately.
•
Battery status indication
Number of
Segments
Charge in
Percentage
Number of
Segments
Charge in
Percentage
Number of
Segments
Charge in
Percentage
10
≥90%
6
50%≤C<60%
2
15%≤C<25%
9
80%≤C<90%
5
45%≤C<50%
1
5%≤C<15%
8
70%≤C<80%
4
35%≤C<45%
Border
blinking
C<5%
7
60%≤C<70%
3
25%≤C<35%
•
When display turns off, connect the USB
cable to the port of the display and then dis-
play turn on and begin charge. If display is
being on, only connect the USB cable to the
port to the display and display begin charge.
Maximum charge voltage is 5V
,
maximum
charge current is 500mA
E-bike operation and maintenance manual
EN
33
Содержание E-Royal Modest 2021
Страница 13: ...N vod na obsluhu a dr bu elektrobicykla SK 13...
Страница 25: ...N vod na obsluhu a dr bu elektrokola CZ 25...
Страница 37: ...E bike operation and maintenance manual EN 37...
Страница 60: ......
