eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
Page 45 of 126
If a connection is established, a green checkmark displays.
If the connection attempt fails, a red exclamation mark displays. The field also
displays the signal strength.
l
Password – Specifies the password for the selected router.
l
DHCP – Set the router to either DHCP (check box) or Fixed IP (uncheck box).
For DHCP, all IP configuration is automatically provided. For Fixed IP, you must
enter all the IP configuration values manually.
See IPS Wi-Fi Properties Available in GCL Using enteliWEB content in the
section for information on available properties.
The following figure shows the IPS1 (Client Station mode) enteliWEB Object Page.
To change the SSID in IPS1
1. In the SSID field, click the arrow to show the list of available Router SSID's.
2. Select a Router SSID.
3. Click Save.
