eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
Page 39 of 126
To set up Static IP addressing:
1. Select the router network name in the SSID field.
2. Select Static in the Assignment field.
3. Define the static IP address. (You probably get this from IT personnel.)
4. Specify the Subnet Mask, Gateway and DNS Server.
5. Click the Save button in the upper right area of the page.
BACnet (Linknet) Network Settings
The settings in this section of the configuration page actually relate to Linknet
configuration and Linknet Network Settings would be a better section name than
BACnet Network Settings. The eZNT-Wi/ eZNTW-Wi models provide support for
Linknet. See also the
Linknet Setup for eZNT-Wi and eZNTW-Wi
section. The
eZNTW without Wi-Fi uses BACnet over MS/TP with EnOcean inputs and outputs.
Device Info
This section of the configuration page provides a way to disable or enable the Micro
USB port. The USB port provides service access but you may want to disable it when
it is not in use.
