Delta AH500 series, Руководство по эксплуатации оборудования

Страница: 579 / 681

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
1 2 - 3 0
Error
Code
Description Solution
16#6208
The data which is received through
the TCP socket exceeds the
device range.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
16#620A
The local communication port set
in the UDP socket function is
illegal.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
16#620B
The remote communication port
set in the UDP socket function is
illegal.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
16#620C
The device from which the data is
sent in the UDP socket function is
illegal.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
16#620D
The transmitted data length set in
the UDP socket function is illegal.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
16#620E
The data which is sent through the
UDP socket exceeds the device
range.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
16#620F
The device which receives the data
in the UDP socket function is
illegal.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
16#6210
The received data length set in the
UDP socket function is illegal.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
16#6211
The data which is received through
the UDP socket exceeds the
device range.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
16#6212
There is no response from the
remote device after the timeout
period. (Socket)
Make sure that the remote device is connected.
16#6213
The data received exceeds the
limit. (Socket)
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
16#6214
The remote device refuses the
connection. (Socket)
Make sure that the remote device operates normally.
16#6215 The socket is not opened.
Check whether operational sequence in the program is
correct.
16#6217 The socket is opened.
Check whether operational sequence in the program is
correct.
16#6218
The data is being sent through the
socket. Check whether operational sequence in the program is
correct.