manualshive.com logo in svg

Delta AH500 series, Руководство по эксплуатации оборудования

Полное руководство по аппаратному обеспечению серии Delta AH500, включая Hardware Operation Manual, доступно для бесплатного скачивания с manualshive.com. Узнайте подробности о функциях и настройках этого продукта, чтобы максимизировать его производительность и эффективность. Сделайте свою работу проще, скачав нужное руководство прямо сейчас.

Поделиться
Скачать
background image

A H 5 0 0   H a r d w a r e   a n d   O p e r a t i o n   M a n u a l  

11 - 6 8  

The 

Item 1

 window is described below. 

 

Enable

 

If users want to make the PLC execute the data exchange, they have to select the 

Enable

 checkbox. If the 

users want to stop the data exchange temporarily, they can leave the 

Enable

 checkbox unselected. 

 

 

IP Address

 

Users have to type the IP address of the slave to which the PLC will connect in the 

IP Address

 box. 

 

 

The Shortest Update Cycle (ms)

 

Users have to set the shortest cycle of updating the data exchange. A millisecond is a unit of time. When 
the data exchange is executed, it is updated at specific intervals. However, if the data exchange is 
prolonged due to network congestion or other reasons, it will be updated according to the actual situation. 
 

 

Connection Timeout (ms)

 

Users can set the longest time that is allowed to elapse before the data exchange is executed. A 
millisecond is a unit of time. If the data exchange is not executed after the longest time set elapses, a 
connection timeout will occur. The PLC still tries to connect to the slave station selected at specific 
intervals. Once the PLC connects to the slave station selected, the data exchange will be executed. 
 

 

Support read/write synchronization (Function code 0x17)

 

If the slave to which the PLC will connect can complete reading and writing simultaneously (Modbus 
function code 0x17), users can select the 

Support read/write synchronization (Function code 0x17)

 

checkbox. After the 

Support read/write synchronization (Function code 0x17)

 checkbox is selected, 

the PLC will read data and write data simultaneously, and the efficiency in exchanging data will increase. 
 

 

Device Type

 

Users can select the model of the slave to which the PLC will connect in the 

Device Type

 drop-down list 

box. They can select a standard Modbus TCP device or a Delta PLC. If they select a Delta PLC, they can 
use the registers in the Delta PLC when they set data blocks. When selecting a 3

rd

 party device, they can 

select Modbus Register Hex from the Remote Start Address (Hex) drop-down list and define a 
hexadecimal 4-digit Modbus absolute positon.   
 

 

Input

 

Users can set the register in which the data read will be stored in the 

Local Start Address

 box. The 

register set can only be a D device (not limited to AH500 advanced CPU series: AHCPU501/511/521/531). 
The users can set the register whose contents will be read in the 

Remote Start Address

 box. The register 

and the address which can be set depend on the device type selected in the 

Device Type

 drop-down list 

box. The users can set the quantity of data which will be read in the 

Quantity

 box. For AH500 basic CPU 

series (AHCPU500/510/520/530), the unit used depends on the remote register type selected. 100 words 
(1600 bits) at most can be read. However, if the slave to which the PLC will connect is an AH500 series 
CPU module, 400 words (6400 bits) at most can be read. As for AH500 advanced CPU series 
(AHCPU501/511/521/531), users can select the register type according to the requirements. 
 

 

Output

 

Users can set the register whose contents will be written in the 

Local Start Address

 box. The register set 

can only be a D device (not limited to AH500 advanced CPU series: AHCPU501/511/521/531). The users 
can set the register into which data will be written in the 

Remote Start Address

 box. The register and the 

address which can be set depend on the device type selected in the 

Device Type

 drop-down list box. The 

users can set the quantity of data which will be written in the 

Quantity

 box. For AH500 basic CPU series 

(AHCPU500/510/520/530), the unit used depends on the remote register type selected. 100 words (1600 
bits) at most can be written. However, if the slave to which the PLC will connect is an AH500 series CPU 
module, 400 words (6400 bits) at most can be written. As for AH500 advanced CPU series 
(AHCPU501/511/521/531), users can select the register type according to the requirements. 
 
When users set a data exchange block, the local register set can only be a word device, and the remote 
register set can be a bit device. If the remote register set is a bit device, the device number of the remote 
register does not need to end with 0. For example, the remote register set can be D0.3. If the data which 

Содержание AH500 series










































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AH500 series

D-Link DES-1210-08P Manual preview
DES-1210-08P
Бренд: D-Link Страницы: 15
Javad TRIUMPH-3NR User Manual preview
TRIUMPH-3NR
Бренд: Javad Страницы: 35
Measurement Computing PC-CARD DAS16 User Manual preview
PC-CARD DAS16
Бренд: Measurement Computing Страницы: 27
EKF Electronik CompactPCI CC8-BLUES User Manual preview
CompactPCI CC8-BLUES
Бренд: EKF Electronik Страницы: 52
FONESTAR XO-324 Instruction Manual preview
XO-324
Бренд: FONESTAR Страницы: 8
Kramer RK-10MT Quick Start Manual preview
RK-10MT
Бренд: Kramer Страницы: 2
ZoneVu ZSI-450-IP Installation Manual & User Manual preview
ZSI-450-IP
Бренд: ZoneVu Страницы: 15
FUNcube Dongle Pro User Manual preview
Dongle Pro
Бренд: FUNcube Страницы: 23
Boss Vocal Performer VE-20 Owner'S Manual preview
Vocal Performer VE-20
Бренд: Boss Страницы: 20
Dahua NVR41-4KS2 Series User Manual preview
NVR41-4KS2 Series
Бренд: Dahua Страницы: 452
Xilinx MP3 NG Application Note preview
MP3 NG
Бренд: Xilinx Страницы: 27
Intellinet 720564 Instructions preview
720564
Бренд: Intellinet Страницы: 2
Patterson Homecraft Rolyan AA6240 Instruction Sheet preview
Homecraft Rolyan AA6240
Бренд: Patterson Страницы: 2
Abus TVAC21000 User Manual preview
TVAC21000
Бренд: Abus Страницы: 98
Paradyne MIM-4T1 Installation Instructions Manual preview
MIM-4T1
Бренд: Paradyne Страницы: 10
FabiaTech FB2510 Series User'S Quick Setting preview
FB2510 Series
Бренд: FabiaTech Страницы: 3
Crestron STIRP Installation Instructions preview
STIRP
Бренд: Crestron Страницы: 2
StarTech.com ECUSB3S254F Instruction Manual preview
ECUSB3S254F
Бренд: StarTech.com Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды