Delta AH500 series, Руководство по эксплуатации оборудования

Страница: 422 / 681

Chapter 9
N e t w o r k C o n f i g u r a t i o n
9 - 1 9
(2)
After the users click
Connect Devices
on the
Edit
menu, or on the toolbar, the system will
connect the devices clicked to the new network added.
Additional remark
(a)
If the devices selected do not conform to the principle described in (1), the system will not connect the
devices selected to a new network, and a warning message will appear.
(b) If a device selected has more than one port which is not connected to any network and matches the new
network
added, the system will connect the port whose port number is smaller to the
new network
added
.
(c)
U
sers can select multiple devices by dragging a selection net around them. If the users press
Ctrl+A on
the keyboard, all the devices and networks in the working area are selected.
(d) If users select a node which consists of a PLC and a module, and the PLC and the module conform to the
principle described in (1), the system will connect a port of the PLC and a port of the module to a new
network added.
(e)
If the devices that users select have ports which are not connected to any networks, and can be
connected to an RS
-
485 network or an Ethernet network, the system will connect the ports to an Ethernet
network.