213777, Rev. A
www. s p e c s e l e c t . c o m
Page 6
305mm (12”)
Square Frame
Flushvalve
Access
Box Frame
356mm (14”)
Square
Stainless
Steel Cover
Sensor
Seat
76mm
(3”)
Minimum
Bottom of rough in box
to be 70mm (2.75”) below
centerline of sensor
Bottom of rough in box
to be 203mm (8”) below
centerline of sensor
Bottom of rough in box
to be 375mm (14.75”) below
centerline of sensor
of Sensor
Outlet Parts
Tubing, Elbow, Wall
and Spud Flange,
Spud Nut, etc.
Supplied as required
for Fixture specified.
TOILET
URINAL
Flushvalve
Access
Box Frame
305mm (12”) Square Frame
of sensor
Outlet Parts
Tubing, Elbow, Wall
and Spud Flange,
Spud Nut, etc.
Supplied as required
for Fixture specified.
(Except For 3/4” and
1-1/4” Top Inlet Urinal
Fixtures.)
76mm (3”)
Sensor
279mm
(11”)
Product Supplied as Shown by Solid Lines.
All Items Shown by Dotted Lines Supplied by Others.
76mm (3”) to
BOF
76mm (3”) to
BOF
of
sensor
(Centerline
)
C
L
of
sensor
(Centerline)
C
L
of
sensor
(Centerline)
C
L
165mm
(6.5”)
222mm
(8.75”)
to
BOF
of
sensor
of
sensor
of
sensor
57mm
(2.25”)
to
BOF
4-1/2” square
stainless steel plate
(box 4” x 4”)
14” square
stainless steel plate
(frame 12” x 12”)
14” x 20”
stainless steel plate
(frame 12” x 18”)
4-1/2” square
stainless steel plate
(box 4” x 4”)
14” square
stainless steel plate
(frame 12” x 12”)
14” x 20”
stainless steel plate
(frame 12” x 18”)
76mm
(3”) to
BOF
248mm
(9.75”) to
BOF
BOF = Bottom Of Frame
BOF = Bottom Of Frame
(Centerline)
(Centerline)
C
L
C
L
(Centerline)
C
L
frame
outline
frame
outline
Fig. 1D
* NOTE: Recommended height to sensor from top of fixture is 508-559 mm (20-22”)
with 610 mm (24”) maximum.
NOTE: Due to excess back pressure of low flow water
closets, outlet tubes must be braced to prevent
tubes from disconnecting.
NOTE: Flushometer MUST be paired with a fixture of
equivalent flush volume.
