Delta 160 T6 Series, Руководство пользователя

Страница: 2 / 10

213777, Rev. A
www. s p e c s e l e c t . c o m
Page 2
Item # Part # Description
060799A Universal TECK washers and O-rings repair kit
061025A Universal TECK parts washers and O-rings repair kit
1
060704A ٭
060771A ٭
Transformer (110 to 24 VAC) for 5 sensor modules
Transformer (110 to 24 VAC) for 10 sensor modules
2
061273A ٭٭
061272A
٭٭
Sensor module - urinal fl ush valve
Sensor module - water closet fl ush valve
3 060679A Override button assembly
4 060072A No. 6 - 32 x 2” fl at head stainless steel screws (4/pkg) and security spanner bit package for 4-1/2“ (114 mm) cover
5 060680A 48” (1,220 mm) Solenoid Extension Wire
6
061244A
060674A
060675A
4-1/2” x 4-1/2” (114 mm x 114 mm) (shown) stainless steel cover with studs and screws
14” x 14” (356 mm x 356 mm) (not shown) stainless steel cover with studs and screws
14” x 20” (356 mm x 508 mm) (shown) stainless steel cover with studs and screws
7 060073A No.10 - 32 x 2” fl at head stainless steel screws (4/pkg) and security spanner bit package for 14“ (356 mm) covers
8a 061024A Regulating screw and O-ring
8b
061341A ٭٭
061342A ٭٭
061343A ٭٭
061344A ٭٭
061345A ٭٭
061346A ٭٭
061169A ٭٭
Cap/Solenoid & Regulating Screw Assembly for 0.5L (0.125 gal) fi xed urinals (see Table 1)
Cap/Solenoid & Regulating Screw Assembly for 1.9L (0.5 gal) fi xed urinals (see Table 1)
Cap/Solenoid & Regulating Screw Assembly for 4.2L (1.1 gal) fi xed water closets (see Table 1)
Cap/Solenoid & Regulating Screw Assembly for 4.8L (1.27 gal) fi xed water closets (see Table 1)
Cap/Solenoid & Regulating Screw Assembly for 6.0L (1.6 gal) fi xed water closets (see Table 1)
Cap/Solenoid & Regulating Screw Assembly for 1.9L (0.5 gal) adjustable urinals (see Table 1)
Cap/Solenoid & Regulating Screw Assembly for 6.0L (1.6 gal) adjustable water closets (see Table 1)
9 060078A Screws for Cast Cap (4/pkg)
10a 061323A ٭٭٭ Diaphragm/Guide Assembly Complete - W/C (see Table 1)
10b 061324A ٭٭٭ Diaphragm Guide Assembly for Urinals (See Table 1)
10c 060079A-MMO Diaphragm only (12/pkg)
11a 060507A Poppet Pin Pack (3/pkg) (also see 11b) (See Table 1)
11b 060508A Poppet Pin Pack (3/pkg) (0.5L Valves only) (See Table 1)
11c 062025A Washer (3/pkg) (required for 6.0 & 4.8L Valves only) (See Table 1)
12 062007A ٭٭٭ Brass seat with O-ring
13 060479A Handle and screw
14 060845A Retrofi t check stem unit, capnut and handle complete
15 060082A Adjustable Tail O-Ring Package (20/pkg)
16 060785A Vacuum breaker sleeve complete
17 060094A Coupling ring
18
060782A
060783A
1-1/2” x 10” (38 mm x 254 mm) V.B., coupling ring and tube complete
1-1/2” x 22-3/4” (38 mm x 578 mm) V.B., coupling ring and tube complete
19
060778A
060463A
1½” Rough Coupling Nut & Washers
¾” Coupling Nut, ¾” Washers & ¾” Spud Flange
20
060083A
060049A
1½” Slip Joint Washers (12/pkg)
¾” (19mm) Rubber and fi ber washers (12/pkg)
21 060683A
٭
24VAC to 6VDC converter
22 060344A Filter screen kit (12/pkg)
23 060342A Plug and O-ring for handle end
24 060681A Flat battery holder (4 “C” cell batteries)
25 060684A Square battery holder (4 “C” cell batteries) - required for 4” (102 mm) box
26 060923A Nut retainers for access box frame (12/pkg)
NOTE: Refer to TECK fl ushometer repair parts and maintenance manual for additional parts and information.
٭ Each individual sensor module requires its own 24VAC to 6VDC hardwire converter.
٭٭ For valves manufactured before October 2014, you must replace both the sensor module and the cap/solenoid which are
included in; UR Kit - 061284A or WC Kit - 061285A.
٭٭٭ For valves manufactured before January 2013, you must replace the sensor module and the cap/solenoid, diaphragm assembly
and the brass seat with O-ring which are included in; UR Kit - 061286A or WC Kit - 061287A.