3
Installation and Operating Manual
IP277, Rev DA
Mobrey MCU200 Series
February 2020
Avoid unsafe equipment
The equipment may be unsafe if any of the following statements apply:
Equipment shows visible damage
Equipment has failed to perform an intended operation
Equipment has been subjected to prolonged storage under unfavourable conditions
Equipment has been subjected to severe physical stress.
Live conductors
Do not open the electronics unit when it is energised.
When the equipment is connected to its’ supply, the opening of covers or removal of parts could expose live
conductors. The equipment must be disconnected from all power and signal sources before it is opened for any
adjustment, replacement, maintenance or repair. Adjustment, maintenance and repairs must be must be done by
qualified personnel.
Equipment modification
To avoid introducing safety hazards, never install non-standard parts in the equipment, or make any unauthorised
modification. To maintain safety, always return the equipment to Delta Mobrey for service and repair.
If in any doubt as to the serviceability of the equipment, don’t use it. Get it properly checked out by a qualified
service technician.
