Delta Elektronika SM 120-25 D Скачать руководство пользователя страница 20

P.O. BOX 27
4300 AA ZIERIKZEE
NETH ER LANDS
TEL. +31 111 413656
FAX +31 111 416919

www.DeltaPowerSupplies.com

We

Delta Elektronika
P.O. BOX 27
4300 AA ZIERIKZEE
The Neth er lands

de clare un der sole re spon si bil ity that the fol low ing Power Sup plies:

SM 15-200 D
SM 30-100 D
SM 45-70 D
SM 70-45 D
SM 120-25 D
SM 300-10 D

meet the in tent of Di rectives 2004/108/EC; 92/31/EEC; 93/68/EEC for Elec tromagnetic
Com pat i bil ity and
Di rec tives 73/23/EEC; 93/68/EEC re gard ing Elec tri cal Safety. (Low Volt age Di rec tive)
Com pli ance was dem on strated to the fol low ing spec i fi ca tion as listed in the of fi cial Jour nal
of the Eu ro pean Com mu ni ties:

EN 61204-3 EMC, low volt age power sup plies

EN 61000-6-3 Ge neric Emissions:

(res i den tial, light in dus trial)

EN 55022 Ra diated and con ducted, Class 

B

EN 61000-3-3 Volt age fluc tuation and flicker

EN 61000-6-1 Ge neric Immunity:

(res i den tial, light in dus trial)

EN 61000-6-2 Ge neric Immunity:

(in dus trial en vi ron ment)

EN 61000-4-2 Elec trostatic Dis charge
EN 61000-4-3 Ra di ated elec tro mag netic fields
EN 61000-4-4 Elec trical Fast Tran sients / Bursts
EN 61000-4-5 Surge on DC out put
EN 61000-4-5 Surge on line in put
EN 61000-4-6 RF com mon mode, con ducted
EN 61000-4-11 Volt age vari ations and dips

EN 60950 Safety of IT equipment

EN 61010 Safety of elec trical equipment for mea surement, con trol and laboratory use

EC Dec la ra tion of Con for mity

Man ag ing director

Содержание SM 120-25 D





















Отзывы: