DELTA DORE CS 2000 TYXAL+, Руководство пользователя

Страница: 11 / 44

- 11 -
EN
2.7 Clearing defects
Each time the system is activated or deactivated, the alarm
control unit will inform you that an event (or defect) is stored by
using a series of beeps or a refusal to switch on.
These events (intruder detection, product defect, open entry,
etc.) can be cleared so as not to be signalled by the control unit.
The system must be off.
If you do not have a touch screen keypad, you can
clear defects by using the remote control:
Press and hold the
OFF
button for 5 seconds.
The LED changes from red to green to confirm the action.
The alarm control unit emits a series of beeps, stops, then emits
one more beep.
2.8 Controlling a control system
Mode D: Pulse control
Press the
1
or
2
button.
The LED changes from red to green.
Mode E: On/Off control
Press the
1
or
2
button then
ON OFF
or
ON OFF
.
The LED changes from red to green.
2. Use with the remote control
OFF
>5s
The
1
or
2
buttons must be configured in Mode D or E
(see table § 3.1).
or
1 2
or
ON
On
Off
OFF
1 2
or
1 2
or
< 2s
< 2s
Example
Example
Beep.Beep.Beep..... Beep