- 10 -
OK
1
2
ou
>2s
SOS
+
1
2
ou
>2s
SOS
OK
2.4 Manual override
.
Ê
The alarm control unit denies the activation.
It emits a series of beeps to warn the user.
On the remote control, the LED flashes red.
Ë
Confirm a second time by pressing
ON within 5 seconds after first pressing the
button.
The LED changes from red to
green to confirm the action.
The alarm control unit emits
a BEEP.
2.5 Triggering of a discreet SOS alarm
Press and hold the
1
or
2
button for 2 seconds.
The LED changes from red to green to confirm the action.
- press OFF (deactivates the system).
The telephone transmitter calls from the
3
rd
number programmed. The 1
st
and 2
nd
numbers are not
called for the discreet SOS.
2.6 Triggering of an SOS with siren
Press and hold the
1
or
2
button for 2 seconds
to trigger:
- a call cycle from the transmitter to the programmed
numbers (starting with the 1
st
number).
- an audible signal from an associated siren.
The LED changes from red to green
to confirm the action.
Press OFF to stop an emergency alarm with siren
in progress.
ON
1
Activation denied (e.g.
open entry)
Beep, beep, beep
ON
ON
< 5s
OK
1
2
2. Use with the remote control
For example, this function is used to activate the system even
if an entry remains open or if a product shows a defect (dead
battery, etc.).
This function is used to trigger a discreet alarm with your
telephone transmitter, without any aggressor being aware of it
(no audible signal) whether the system is on or off.
The
1
or
2
buttons must be configured in
Mode B (see
table, § 3.1).
This function is used to start a call with the telephone trans-
mitter to warn relatives that you are in a situation of distress.
It also sets off the sirens with a specific tone.
The
1
or
2
buttons must be configured in
Mode C (see
table, § 3.1).
Beep, beep, beep
Содержание CS 2000 TYXAL+
Страница 1: ...CS 2000 TYXAL www deltadore com Alarm system User guide ...
Страница 43: ... 43 EN ...