DELTA DORE CS 2000 TYXAL+, Руководство пользователя

Страница: 6 / 44

- 6 -
1. How does your alarm system work?
ON
45''
Beep...beep...
beep...
Beep
Exit timer (up to 90 seconds)
Pre-alarm zone
Zone 2
Ground floor
Zone 1
floor
1.2 Operation by independent
zone
The CS 2000 alarm control unit authorises the monitoring of 2
zones.
The zones are used to protect part of the home.
The management of these zones is fully separate.
One or more zones can be on at the same time.
• Restricted access code
If you want to give access to a part of your home while you are
away (example: maintenance personnel), ask your installer to cre-
ate a restricted access code.
• Use in the residential sector
You can, for example, protect the floor during the day when you are
in the ground floor zone.
Likewise, at night, the ground floor is protected when you are on
the first floor.
You can also use a zone outside of your home to protect your yard
or garden, for example. This zone is called "pre-alarm zone".
1.3 Exit timer
You are leaving the home.
When the system is activated, you have an exit timer (up to 90
seconds).
After this time, the alarm control unit emits a beep to signal
that the system is on.
Any intrusion will thus be signalled.
1.4 Entry timer
You are entering a zone monitored by a motion
detector. You have an entrance timer to deactivate
the system. This time can be set up to 45 seconds.
Beyond this time, the control unit will set off a siren.
During this period, the control unit emits a series of beeps to
warn you that the siren will be set off imminently.