Delphin ProfiMessage, Руководство по оборудованию

Страница: 50 / 322

Profi Message
4 Configuration and operation
The following paragraphs are covered in this Section:
l
The basic settings of the device, such as the network settings or the device
ID, are described in the section
Device configuration.
l
The section Connecting slave devices explains the configuration process
when multiple devices are being used.
l
Configuring the various I/O module channels is described in detail in the sec-
tion on
Configuring module channels .
Settings and operating steps which are the same for all devices are available under
Common device settings.
l
The Configuration via web browser section explains the (device) settings
that you can apply via an internet browser.
The following functions are available only via the device's web interface:
Resetting to factory settings and updating the device's firmware. Some basic
settings are also possible, for example to the Ethernet interface or device-
clock.
l
The Configuring software channels section describes the various ways in
which to perform calculations on measurement data or between channels.
l
Read the Configuring interfaces section on how to use the various interfaces
for connecting or exchanging data with external devices.
l
Devices are equipped with internal memories to enable measurement data to
be saved. The
Device memory Section explains how this storage space can
be used, for example for partitioning of different channel groups.
l
The Data transfer to USB memory stick Section explains how to externally
back up internally stored data.
See also Getting Started and Settings for all dialogues.
4.1 Overview
See also Getting Started
Configuration of the most important parameters, such as network settings, can be
performed using either the Web Interface from the device or the DataService Con-
figurator program. Settings via the Web interface are described in the
Con-
figuration via Web browser Section. The configuration of any sensor and actuator
connections, and the definition of calculation (software channels) takes place via
the DataService Configurator and is explained in the following sections. A detailed
description of the program DataService Configurator is available in the manual on
DataService Configurator.
ClickingDataService Configurator starts the DataService background program and
establishes a connection to the devices (the default for the first installation is
described in the
Getting Started section). The DataService Configurator dialogue is
split, enabling a device to be selected on the left in the Connections tab and
50
Delphin Technology AG
Dezember 2015
Profi Message Manual