Delphin ProfiMessage, Руководство по оборудованию

Страница: 52 / 322

Profi Message
4.2
Profi Message
device configuration
The Channels tab's top level is the device level in DataService Configurator The
hardware view (right panel) displays the various system interfaces, memory and
software channels. The hardware view (right panel) displays the various system
interfaces, memory and software channels.
This Section explains the settings that you can make for the device itself. This
takes place via "
Profi Message '192 .168.100.116'..." in the Channels tab in
DataService Configurator (see example). Use the Properties context menu to
amend a device name and ID or to enter a description for the device. Use Main set-
tings context menu to change network and NTP settings.
Refer to
Configuring main device , Network settings, NTP
For explanations of other settings, see:
l
Device memory for internal memory
l
Configuring module channels for I/O modules
l
Configuring interfaces for CAN, COM and PROFIBUS interfaces
l
Configuring software channels for system monitoring and calculations
Info
For general information on configuration dialogs (including header
and footer), see
Settings for all dialogs .
4.3 Connecting slave devices
Slave devices can only be connected with Profi Message devices. The Profi Mes-
sage system uses CAN-bus and Delphin CAN Protoco Delphin l (DCP) to connect to
52
Delphin Technology AG
Dezember 2015
Profi Message Manual