Delphin ProfiMessage, Руководство по оборудованию

Страница: 195 / 322

Profi Message
l
Pre-decimal places
Sets the number of decimal places before the decimal point/separator. The
decimal separator is output only when at least one post-decimal place is out-
put.
l
Leading zeroes
Sets whether the pre-decimal places are to include leading zeroes when the
number has fewer decimal places. This means that the same number of char-
acters are always sent.
l
Post-decimal places
Sets the number of pos-decimal places to be output.
l
Always sign
Ensures that positive as well as negative signs are always sent. The sign
does not count as a pre-decimal place.
l
Example
Displays the formatting of an imaginary number according to the settings
made.
Format
Sets what is to be sent, e.g. value and unit for the channel. Do not delete the
required placeholders, including % signs. You can send only one channel (value),
but any number of placeholders for other information, e.g. for outputting the cur-
rent date and time. You can also enter text instead of placeholders, e.g. text to be
sent for initialisation. For example, by using the initialisation string "Meas-
ure:Volt:DC" you can switch a multimeter to DC measurement.
To send output channel data, use the following placeholders:
%VALUE%: Channel value.
%STATUS%: Channel status.
%UNIT%: Channel unit.
%NAME%: Output channel name.
%DESCRIPTION%: Output channel description.
%LOCATION%: Output channel location.
%ID%: Output channel ID.
To send source channel data, use the following placeholders:
%UNITSOURCE%: Source channel unit.
%NAMESOURCE%: Source channel name.
%DESCRIPTIONSOURCE%: Source channel description.
%LOCATIONSOURCE%: Source channel location.
%IDSOURCE%: Channel ID for the source channel.
The following general placeholders are available for you to use:
:%DATETIME%: Current date and time.
%HOUR%: Current time.
%MINUTE%: Current minute.
%SECOND%: Current seconds.
%YEAR2%: Current year as 2 digits.
195
Delphin Technology AG
Dezember 2015
Profi Message Manual