13
Using the SPOT Communicator
The SPOT Satellite Communicator has two buttons and
fi ve light indicators that provide access to power, the SOS
message, and device status information. It can operate
alone to send emergency messages when the PN-60w
is not available.
For information about setting up the SPOT Communicator
for fi rst time use and how to set up your account at
fi ndmespot.com, see the
Quick Start Guide
.
What You Need to Know
The SPOT Communicator needs a clear view of
the sky
to obtain a GPS signal and provide the most
accurate location information. It is not reliable indoors,
in a cave, or in very dense woods.
Orient the SPOT Communicator so that the SPOT
logo faces toward the sky
—this provides optimal
performance as the antenna is located under the logo.
Keep the SPOT Communicator at least 12 inches
away from other GPS devices
as it can interfere
with signal reception of other GPS devices.
For detailed information about how the SPOT Communicator
works and its coverage area, go to fi ndmespot.com.
Buttons
Power
The
Power
button is on the side of the SPOT
Communicator above the
SOS
button.
Press and hold the
Power
button for three seconds
to turn the device on and off.
With the SPOT Communicator turned off, press
and hold the
Power
button for fi ve seconds to enter
Pairing Mode. Pairing Mode cannot start unless
the device is turned off.
SOS
The
SOS
button is on the side of the SPOT Satellite
Communicator below the
Power
button. It has a
protective cover to prevent accidental activation.
To activate or cancel SOS messaging mode from
the SPOT Communicator, press and hold the
SOS
button
for three seconds. A message dialog appears
on the PN-60w. An SOS message triggered by the
SPOT Communicator can be canceled by the SPOT
Using the SPOT Communicator
Содержание Earthmate GPS PN-60
Страница 1: ...Earthmate PN 60 GPS DELORME User Manual ...
Страница 5: ......