DeLonghi ETAM29.62X, Инструкция по эксплуатации

Страница: 14 / 23

13
9.3 Customising the “my coffee” quantity
The appliance is set by default to automatically deliver about
30ml of “my coffee”. To modify this quantity, proceed as follows:
1. Place a cup under the coffee spouts (A10) (fig. 10).
2. Press the
icon (B4) (fig. 9) until “MY COFFEE” is
displayed.
3. Press and hold the icon (B7) until the message “1 MY
COFFEE Program quantity” appears on the display (B3) and
coffee delivery begins. Release the icon.
4. As soon as the coffee in the cup reaches the required level,
press the icon again.
The quantity of coffee in the cup has now been programmed.
9.4 Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A23) (fig. 11).
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coffee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
9.5 Tips for a hotter coffee
For hotter coffee, you should:
• perform a rinse cycle by selecting the “Rinse” function in
the settings menu (see section “8.1 Rinsing”).
• warm the cups with hot water (see section “11. Delivering
hot water”).
• increase the coffee temperature in the settings menu (see
section “8.9 Setting the temperature”).
9.6 Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and make it unusable.
1. Fill the container (A3) (fig. 12) with coffee beans.
2. Place under the coffee spouts (A10):
- 1 cup, if you want to make 1 coffee (fig. 10);
- 2 cups, if you want 2 coffees (fig. 13).
3. Lower the spouts as near as possible to the cup. This makes
a creamier coffee (fig. 14).
4. Press the icon corresponding to the number of coffees re-
quired (B7 - 1 cup or B6 -2 cups ).
5. Preparation begins. The amount of coffee selected appears
on the display together with a progress bar which gradual-
ly fills as preparation progresses.
Please note:
• While the machine is making coffee, delivery can be inter-
rupted at any moment by pressing any icon.
• At the end of delivery, to increase the quantity of coffee in
the cup, within 3 seconds just press one of the coffee icons (
or ).
Once the coffee has been made, the appliance is ready to make
the next drink
Important!
• Various alarm messages could be displayed while using the
appliance (fill tank, empty grounds container, etc.). Their
meaning is explained in section “18. Displayed messages”.
• For hotter coffee, see section “9.5 Tips for a hotter coffee”.
• If the coffee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in section “19.
Troubleshooting”.
9.7 Making coffee using pre-ground coffee
Important!
• Never place coffee beans in the pre-ground coffee funnel
(A4) as this could damage the appliance.
• Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty
it. This could damage the appliance.
• Never use more than 1 level measure (C2) or it could dirty
the inside of the coffee machine or block the funnel.
Please note!
When you use pre-ground coffee, you can only make one cup of
coffee at a time.
1. Press the icon (B4) repeatedly
(B4) (fig. 8) until “Pre-
ground” appears on the display (B3).
2. Open the pre-ground coffee funnel lid (A2).
3. Make sure the funnel is not blocked, then add one level
measure of pre-ground coffee.
4. Place a cup under the coffee spouts (A10) (fig. 10).
5. Press the 1 cup coffee icon (B7).
3. Press the
OK
icon (B1) (fig. 4).
4. The message “Confirm?” is displayed.
5. Press the
OK icon to confirm and exit.
8.14 Statistics function
This displays statistics relating to the machine. To display the
statistics, proceed as follows:
1. Press the
icon (B2) to enter the menu.
2. Press (B4) or (B5) (fig. 7) until “Statistics”
appears on the display (B3).
3. Press the OK icon (B1) (fig. 4).
4. By pressing or you can check:
- how many coffees have been made;
- the total number of litres of water delivered;
- how many times the machine has been descaled;
- how many times the water softener filter has been
replaced.
5. Press the icon twice to exit the menu.
9. MAKING COFFEE
9.1 Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste. You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the
icon (B5) (fig. 8) repeatedly
until the required taste appears on the display (B3).
9.2 Selecting the quantity of coffee in the cup
The appliance is set by default to make a standard quantity of
coffee. To select the quantity of coffee, press the
icon
(B4) (fig. 9) until the message corresponding to the required
quantity of coffee appears on the display (B3):
Coffee selected Quantità in tazza (ml)
MY COFFEE Programmable:
from
≃
20 to
≃
180
SHORT
≃
40
STANDARD
≃
60
LONG
≃
90
EXTRA LONG
≃
120