Delmhorst navigator pro, Руководство пользователя

Страница: 22 / 30

moves forward through weekdays using the

key and backward using the

key. The
SELECT (center) key is only active when menu selection is applied to HOURS , DONE or
CANCEL . Selecting DONE exits this screen back to the SETUP MENU and updates the
clock with the newly chosen values. Selecting CANCEL exits this screen back to the SETUP
MENU
without updating the clock.
 Set Power Off time: This menu option allows the user to change the amount of time
allowed to lapse between the last key press and meter shut-down. Allowable range is
1min – 9min, with a default value of 2min.
 Set Backlight: This menu option allows the user to change the amount of time allowed to
lapse between the last key press and backlight shutdown. The default setting for this
feature is NO , where the backlight is completely disabled. Backlight shutdown delays are
10, 20, 30 seconds. It is recommended that the backlight delay be set to the minimum
amount of time necessary in order to maximize battery life.
 Conversions: This menu option allows the user to change the temperature scale from
Fahrenheit (default) to Celsius. You can also change the electrode type from 4-pin (or
non-insulated) or 2-pin (insulated.)
NOTE: Except for clock settings, all other parameters will return to their default values,
as indicated above, when the RESTORE DEFAULTS option is selected in the Storage
Menu. The values chosen for the Setup Menu parameters will remain in effect even if the
meter is turned off, and even if the battery is removed.
 SET PIN MODE ALARM
Refer to procedure on page 16.