Rev 1
–
Jul 2021
Page | 18
10. Meter Care, Service and Warranty
Care for your Meter
To keep your meter in good working order:
•
Store your meter in a clean, dry place. The protective carrying case
provided is an ideal storage place when the meter is not in use.
•
Change the AA batteries as needed. Continued use with a low battery
may cause the meter to go out of calibration. Remove the batteries if
the meter will not be used for one month or longer.
•
Change contact pins as needed. Keep pin
s’
retainers hand tightened.
•
Clean the meter and contact pins with any biodegradable cleaner.
Use the cleaner sparingly and on external parts only. Keep cleaner
out of the external connector.
•
Ensure the pin cap is always covering the pins when not in use to
avoid unintentional injury. Keep the connector cap in place when not
using an external electrode to keep the connector clean. Each meter
includes two short pieces of nylon cord to tie into tethers for the pins
covers, if desired. See instructions under the Manuals and Training
section of the website.
o
o
www.
.com
1.800.561.8187
