Rev 1
–
Jul 2021
Page | 14
7. Stats
Figure 4: Stats screen components
1.
Stats Selection
The stats selection area will display all statistics in a scrollable list (see
Table 3 below). Press the left and right buttons to view statistics.
2.
Stats Details
Statistics are calculated from the list of saved readings in meter memory,
and only readings taken within the valid measurement range of the
selected material are used for the calculations. Out of range (OOR)
readings will not be included in statistical calculations for average and
standard deviation.
The meter provides statistics (average, high, low, standard deviation) for
the readings that are currently stored in the meter. Note: The statistics in
the meter are calculated without any OOR readings.
The stats details section can only be selected
for the ‘Last 10’ and ‘
Erase
Data
’
options. For these two cases, press the down or center buttons to
enter stats details box from stats selection. Use the left and right buttons
to scroll the list of latest readings or select the desired option for clearing
1
2
www.
.com
1.800.561.8187
