Rev 1
–
Jul 2021
Page | 6
increased leverage when pushing the meter into hard materials. The
battery door is located on the rear of the handle.
5.
LEDs
–
The GREEN light indicates a sufficiently dry moisture level, the
YELLOW light indicates a borderline condition, and the RED light
indicates material that is too wet for most applications. The LED
values are fixed for the BDX-20. For BDX-30 meters, the LED values
can be adjusted for specific wood species and building materials
through the Edge
™
app.
6.
Ambient Light Sensor
–
When the backlight is set to Auto, the ambient
light sensor will trigger the backlight to turn on or off (to the
brightness level set by the user) according to ambient lighting
conditions.
7.
Contact Pins
–
Integral contact pins provide penetration up to 5/16 in
and are easily removable and replaceable. Be sure to leave the pin
cap on the meter when the pins are not in use. To accommodate
proper fit of the pin cover, use the 2498/A-100 pins.
8.
Electrode Connector
–
Connect any external special application
Delmhorst electrode. Be sure to leave the electrode cap on when the
electrode connector is not in use to keep the connector clean.
www.
.com
1.800.561.8187
