Rev 1
–
Jul 2021
Page | 10
Save a Reading: Press the Center button to save a live or held
reading. This will store the reading, material temperature, and pin
correction t
ype to meter memory. A ‘Saved’ message will appear
followed by the memory slot which the reading occupies (ex.
DRYWALL 2/100). This message can be bypassed by pressing
the Read button.
Memory: There are 100 memory slots available in the meter. As
readings are saved, the memory slots will fill in order from lowest
(1) to highest (100). After 100 readings are stored, newly saved
readings will replace the oldest stored readings.
3.
Set Point
Info: The Set Point is the user-selectable moisture level at which the
alarm will sound. This feature allows users to quickly take readings
without having to review each one individually, helping to quickly
identify high moisture areas.
Use: When active, press the left and right buttons to adjust the Set Point
down or up.
The Set Point alarm can be turned off by adjusting the set point
value to zero. This will be indicated by dashes rather than a
numerical value.
4.
Material Temperature
Info: In building trade applications, the material (wood) temperature
will typically be equivalent to the ambient temperature of the
environment. As the temperature increases, the indicated
moisture content will increase above the actual moisture content.
Lower material temperatures result in a lower indicated moisture
content.
www.
.com
1.800.561.8187
