Dell XPS 8300 Скачать руководство пользователя страница 77

Страница: 77 / 116

Fans

Fans

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.

WARNING:

To guard against electrical shock, always unplug your computer from

the electrical outlet before removing the cover.

WARNING:

Do not operate your computer with any cover(s) (including computer

covers, bezels, filler brackets, front-panel inserts, etc.) removed.

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.

Chassis Fan

Removing the Chassis Fan

CAUTION:

Do not touch the fan blades when you are removing the chassis fan, as

this could damage the fan.

Follow the instructions in "Before You Begin" on page 13.

Remove the computer cover (see "Removing the Computer Cover" on

page 17).

Disconnect the chassis fan cable from the system board connector

SYS_FAN1 (see "System Board Components" on page 10).

Remove the four screws that secure the chassis fan to the chassis.

Slide and lift the chassis fan away from the computer as shown in the

illustration.

book.book Page 77 Wednesday, April 25, 2012 12:34 PM

Содержание XPS 8300





















































































































Результаты поиска

Содержание XPS 8300

Отзывы:

Похожие инструкции для XPS 8300

Бренды по названию

Популярные бренды

Dell XPS 8300, Руководство по обслуживанию

Результаты поиска

Содержание XPS 8300

Отзывы:

Похожие инструкции для XPS 8300

Бренды по названию

Популярные бренды