background image

Graphics Card Bracket

31

5

Graphics Card Bracket

 

WARNING: 

Before working inside your computer, read the safety information 

that shipped with your computer. For additional safety best practices information, 
see the Regulatory Compliance Homepage at 
www.dell.com/regulatory_compliance.

 

WARNING: 

To guard against electrical shock, always unplug your computer from 

the electrical outlet before removing the cover.

 

WARNING: 

Do not operate your computer with any cover(s) (including computer 

covers, bezels, filler brackets, front-panel inserts, etc.) removed.

 

CAUTION: 

Only a certified service technician should perform repairs on your 

computer. Damage due to servicing that is not authorized by Dell is not covered by 
your warranty.

 

NOTE: 

The graphic card bracket is present in your computer only if you ordered a 

double-width graphics card at the time of purchase.

Removing the Graphics Card Bracket

1

Follow the instructions in "Before You Begin" on page 13.

2

Remove the computer cover (see "Removing the Computer Cover" on 

page 17).

3

Remove the two screws that secure the graphics card bracket to the chassis.

4

Lift the graphics card bracket off the chassis. 

5

Set the graphics card bracket aside in a secure location.

book.book  Page 31  Wednesday, April 25, 2012  12:34 PM

Содержание XPS 8300





















































































































Отзывы: