Dell XPS 8300 Скачать руководство пользователя страница 110

Страница: 110 / 116

110

System Setup Utility

If you are booting from a USB device, connect the USB device to a USB

connector.

Turn on (or restart) your computer.

When

F2 Setup, F12 Boot Options

appears in the lower-right

corner of the screen, press <F12>.

NOTE:

If you wait too long and the operating system logo appears, continue to wait

until you see the Microsoft Windows desktop. Then shut down your computer and

try again.

The

Boot Device Menu

appears, listing all available boot devices.

On the

Boot Device Menu

choose the device you want to boot from.

For example, if you are booting to a USB memory key, highlight

USB

Storage Device

and press <Enter>.

NOTE:

To boot to a USB device, the device must be bootable. To ensure your

device is bootable, check the device documentation.

Changing Boot Sequence for Future Boots

Enter system setup utility (see "Entering System Setup Utility" on

page 103).

Use the arrow keys to highlight the

Boot

menu option and press <Enter>

to access the menu.

NOTE:

Write down your current boot sequence in case you want to restore it.

Press the up- and down-arrow keys to move through the list of devices.

Press plus (+) or minus (–) to change the boot priority of the device.

Clearing Forgotten Passwords

WARNING:

Before you begin any of the procedures in this section, follow the

safety instructions that shipped with your computer.

WARNING:

The computer must be disconnected from the electrical outlet to

clear the password setting.

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.

book.book Page 110 Wednesday, April 25, 2012 12:34 PM

Содержание XPS 8300





















































































































Результаты поиска

Содержание XPS 8300

Отзывы:

Похожие инструкции для XPS 8300

Бренды по названию

Популярные бренды

Dell XPS 8300, Руководство по обслуживанию

Результаты поиска

Содержание XPS 8300

Отзывы:

Похожие инструкции для XPS 8300

Бренды по названию

Популярные бренды