Dell Studio 1557 Скачать руководство пользователя страница 38

Страница: 38 / 49

Back to Contents Page

Power Button Board

Dell Studio™ 1557/1558 Service Manual

Removing the Power Button Board

Replacing the Power Button Board

Removing the Power Button Board

Follow the instructions in

Before You Begin

Remove the display hinges (see

Removing the Display Hinges

Remove the screw that secures the power button board to the display cover.

Lift the power button board off the display cover.

Replacing the Power Button Board

Follow the instructions in

Before You Begin

Align the screw hole on the power button board with the screw hole on the display cover and replace the screw.

Replace the display hinges (see

Replacing the Display Hinges

Slide the battery into the battery bay, until it clicks in place.

Back to Contents Page

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working

inside the computer.

power button board

screw

Содержание Studio 1557


















































Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды

Dell Studio 1557, Руководство по обслуживанию

Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды