Dell Studio 1557 Скачать руководство пользователя страница 45

Страница: 45 / 49

System Board Assembly

Dell Studio™ 1557/1558 Service Manual

The BIOS chip in the system board contains the Service Tag, which is also visible on a barcode label on the bottom of the computer.

Removing the System Board Assembly

Follow the instructions in

Before You Begin

Remove the palm rest (see

Removing the Palm Rest

Remove the optical drive (see

Removing the Optical Drive

Disconnect the fan cable, AC adapter cable, USB cable, ExpressCard cables, and subwoofer cable from their respective system board connectors.

Remove the six screws that secure the system board to the computer base.

Remove the processor heat sink (see

Removing the Processor Heat Sink

Remove the processor (see

Removing the Processor Module

Remove the processor bracket from the system board.

Remove the Mini-Card from the system board (see

Removing the Mini- Card

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working

inside the computer.

1 fan cable connector

2 screws (6)

3 AC adapter cable connector

4 USB cable connector

5 ExpressCard cables

6 subwoofer cable connector

7 system board

Содержание Studio 1557


















































Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды

Dell Studio 1557, Руководство по обслуживанию

Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды