Dell Studio 1557 Скачать руководство пользователя страница 48

Страница: 48 / 49

Back to Contents Page

USB Connector

Dell Studio™ 1557/1558 Service Manual

Removing the USB Connector

Replacing the USB Connector

Removing the USB Connector

Follow the instructions in

Before You Begin

Remove the optical drive (see

Removing the Optical Drive

Remove the AC adapter connector (see

Removing the AC Adapter Connector

Remove the screw that secures the USB connector.

Remove the USB connector cable from the routing guide.

Disconnect the USB connector cable from the system board connector.

Lift the USB connector and cable out of the computer base.

Replacing the USB Connector

Follow the instructions in

Before You Begin

Place the USB connector and cable in the computer base.

Replace the screw that secures the USB connector.

Route the USB connector cable through the routing guide.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working

inside the computer.

USB connector cable

screw

USB connector cable routing

Содержание Studio 1557


















































Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды

Dell Studio 1557, Руководство по обслуживанию

Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды