Dell Studio 1557 Скачать руководство пользователя страница 26

Страница: 26 / 49

Back to Contents Page

Keyboard

Dell Studio™ 1557/1558 Service Manual

Removing the Keyboard

Replacing the Keyboard

Removing the Keyboard

Follow the instructions in

Before You Begin

Remove the center control cover (see

Removing the Center Control Cover

Remove the two screws at the top of the keyboard.

Lift the keyboard and hold it to access the keyboard cable connector.

Disconnect the keyboard cable from the keyboard cable connector on the system board by rotating the keyboard cable connector latch towards the front
of the computer.

Slide the keyboard cable out of the keyboard cable connector.

Replacing the Keyboard

Follow the instructions in

Before You Begin

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working

inside the computer.

CAUTION:

The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the

keyboard.

NOTE:

If you have the backlit keyboard (optional), you must remove the keyboard backlight cable from the connector on the system board.

screws (2)

keyboard tabs

keyboard cable connector

keyboard cable

Содержание Studio 1557


















































Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды

Dell Studio 1557, Руководство по обслуживанию

Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды