Dell Studio 1557 Скачать руководство пользователя страница 6

Страница: 6 / 49

Back to Contents Page

Internal Card With Bluetooth

Wireless Technology

Dell Studio™ 1557/1558 Service Manual

Removing the Bluetooth Card

Replacing the Bluetooth Card

If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.

Removing the Bluetooth Card

Follow the instructions in

Before You Begin

Remove the palm rest (see

Removing the Palm Rest

Remove the screw that secures the Bluetooth card to the system board.

Lift the Bluetooth card to disconnect it from the system board connector.

Replacing the Bluetooth Card

Follow the instructions in

Before You Begin

Align the connector on the Bluetooth card with the connector on the system board and press the Bluetooth card until it is fully seated.

Replace the screw that secures the Bluetooth card to the system board.

Replace the palm rest (see

Replacing the Palm Rest

Back to Contents Page

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working

inside the computer.

Bluetooth card

screw

Содержание Studio 1557


















































Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды

Dell Studio 1557, Руководство по обслуживанию

Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды