Dell Studio 1557 Скачать руководство пользователя страница 22

Страница: 22 / 49

Back to Contents Page

Fan

Dell Studio™ 1557/1558 Service Manual

Removing the Fan

Replacing the Fan

Removing the Fan

Follow the instructions in

Before You Begin

Remove the optical drive (see

Removing the Optical Drive

Disconnect the AC adapter connector cable, USB cable, fan cable, and the subwoofer cable from their respective connectors on the system board.

Remove the six screws that secure the system board to the computer base.

Lift the system board off the computer base.

Remove the two screws that secure the fan to the computer base.

Lift the fan off the computer base.

Replacing the Fan

Follow the instructions in

Before You Begin

Place the fan on the computer base and replace the two screws that secure the fan to the computer base.

Place the system board on computer base.

Replace the six screws that secure the system board to the computer base.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working

inside the computer.

1 screws (2) 2 fan cable

Содержание Studio 1557


















































Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды

Dell Studio 1557, Руководство по обслуживанию

Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды